Parts

Replacement Parts for the Following Brands These parts are sold as is, and little or no instructions are included. No warranty to the repair is expressed or implied. Repair or replace your equipment at your own risk. Parts listed are what are available and in stock. Supplies are limited and do not guarantee availability. We do not special order any parts not listed here.
Bogen	Canon Digital	Canon Flash	Canon P & S	Canon SLR
Foam and dampers	Kodak	Minolta Flash	Miscellenous Screws
	Nikon	Pentax	Tripod Parts	Slik Tripods

Parts for Kodak Slide Projectors
Kodak Socket Assembly Lamp socket and contact points for the 5000 series slide projectors.	All parts are limited supply. Availability will be determined when the order is placed.
	Carousel Slide Tray Locking Ring For carousel 80 and 140 slide trays.

Bogen Tripod Head Parts Order using pull down menu at bottom of table Click Here for more Bogen Parts
Replacement bubble Two Way level to fit the newer 3047 head (less than 10 years old) and 3039. 3047 heads that are older than 10 years may not have all parts available now.	Replacement bubble 360 level for Bogen heads and tripods that have the single level. Shown here in the slip-in holder. The level can be removed from this holder and will pressure fit into many of the head or tripods that don't use the slip in holder.

Slik Parts

We don't stock a lot of these replacement parts at this time. This is the most common part for us to repair. This is the assembly that holds the quick release plate onto the U8000 and U9000 tripods. Click on picture to enlarge to about life size. This is also called the flip plate, or vertical riser.

Coming Soon Battery Covers And Other Camera Parts

We do not stock all models and cannot get parts for all models made. Some parts are of limited supply, so large orders may not be able to be filled completely. We will do our best to fill as many orders as possible.

Foam and Damper Replacement Kit

Purchase this kit with all the necessary instructions to clean out and replace the old sticky, gooey old damper and light seal foam. Five different thicknesses of foam are included to replace the mirror damper and film door seals on most older cameras that use foam light seal. Enough material in each kit to replace the seals in at least 5 or 6 cameras, if not more. All you need is simple tools like: tweezers, cotton swaps, tooth picks and denatured alcohol.

Canon Rebel SLR Camera Parts
The basic appearance of the Rebel Battery Covers look similar check your camera model for the correct one. Some camera disassembly required. Some mechanical ability required. Parts are sold as is, with no instructions.		Rebel S Battery Cover Some camera disassembly required. Some mechanical ability required (looks similar to the one at right)
Rebel XS Battery Cover Some camera disassembly required. Some mechanical ability required (looks similar to the one above)	Rebel G II Battery Cover Some camera disassembly required. Some mechanical ability required (looks similar to the one above)	Rebel 2000 Battery Cover Some camera disassembly required. Some mechanical ability required (looks similar to the one above)

Canon 10D & 20D LCD Display Covers

Original replacement from Canon for the 10D & 20D D-SLR's, select in the pull down box below.

Canon Old Style Film SLR Camera Parts
Canon T50 battery cover The original replacement battery cover for the T50 35mm film Camera

Canon Camera Parts
The original replacement battery cover for the Original ELPH APS film Camera	Elph 370Z Battery cover The original replacement battery cover for the ELPH 370Z APS film Camera.	Canon Sure shot Tele, Sure shot Tele QD Battery Cover Replacement for the original battery cover.
Canon Sureshot Classic120 Battery Cover Fits the Sureshot Classic 120 and Caption Models	Canon Sureshot 76 Battery Cover Replacement for the original battery cover.

Canon Digital Camera Parts
Battery Cover for the PowerShot S series digital cameras. This part includes the rubber cover for the AC power supply hole. While they all look similar, there are slight differences that make them incompatible with each other. You must be model specific when ordering.
Battery cover for PowerShot S100 camera	Battery cover for PowerShot S200 & S230 cameras		Battery cover for PowerShot S400, S410, S500 cameras


Battery Cover for the Canon Digital Rebel Camera This is the original replacement part from Canon, not a substitute.		Battery Cover for the Canon 20D Digital Camera This is the original replacement part from Canon, not a substitute.

Canon Flash Parts The shoe all look similar, there are differences in the pin configuration and how they fit into the base of the flash. Different shoes do not fit models other that those listed. Select from pull down list below to choose.
188A Flash Hot Shoe The original replacement hot shoe for the AE series flash 188A. Limited supply. This hot shoe is discontinued and no longer available from Canon.	420EZ Hot Shoe The original replacement hot shoe for these flashes. Limited supply. This hot shoe is discontinued and no longer available from Canon.	420EX Flash Hot Shoe The original replacement hot shoe for these flashes.
Hot Shoe for 540EZ, 430EZ, 380EX Flashes The original replacement hot shoe for these flashes.	Hot Shoe for 550EX, MR-14EX, MR-24EX Flashes The original replacement hot shoe for these flashes.	580EX FlashHot Shoe The original replacement hot shoe for the new 580EX flash.

Nikon replacement foot for Speedlites
Nikon SB-28 flash foot This part fits the older SB-28 that is not digital DX enabled	Nikon SB-28dx flash foot (Click on picture to enlarge) Make sure your SB-28DX has the same ridge and hole pattern as this, so you are sure to get the right part.		Nikon SB-80dx flash foot assembly This is the whole assembly for the SB-89DX flash with the metal foot.

Nikon SB-15 flash assembly with rotating joint		Nikon SB-10 flashfoot

Nikon Digital Camera Parts
Nikon Cool Pix 2100/3100 Battery Cover Original replacement part, no contacts are included. These must be salvaged from the old part.	Nikon Cool Pix 4200 Battery Cover Original replacement part , no contacts are included. These must be salvaged from the old part.	Nikon Cool Pix 4300 Battery Cover Original replacement part, no contacts are included. These must be salvaged from the old part.


D100 I/F Cover This is the original replacement for the Nikon D100
D100 Battery Cover This is the original replacement for the Nikon D100 battery door.
Coolpix 950 Battery Cover - Fits only the CoolPix 950 digital camera. This is the complete assembly.

Nikon Film Camera Parts
N80 Battery Cover (Click on picture to enlarge) This is the original replacement as it came on your camera	Lite Touch 500 Battery Cover		Battery Cover for N55 and N75 film cameras Original Nikon replacement battery cover for both the N55 and N75 films cameras.

N4004, N5005 Battery Cover This is the original replacement as it came on your camera. It will fit the N4004, N5005, F401 and F501 cameras

Film Door for N80 Back only, includes the control buttons, and film guides. Pressure plate is included, but the connecting ribbon wire and ribbon protective cover are not and must be taken from old back. Film Door for F100 Back only, includes the control buttons, and film guides. Pressure plate is not included
Film Door Latch Repair Kit for N6006, N6000, N5005, N4004, N50, F401, F501, F601 and others		Film Door for N70 Back only. No pressure plate or other parts attached.	Film Door for N65 Back only. No pressure plate or other parts attached.

F100 Sponge Seal for the film Door Window.

Pentax Camera Parts
IQ 105WR Battery Cover Replaces the original battery cover for the older IQ 105WR and IQ 95WR cameras	IQ90WR Battery Cover	Original IQ Battery Cover To fit the IQ Zoom EZY-R and 738G camera
K1000 Battery Covers (not shown) Two types, the really old style made of solid metal and the new style that is silver plastic with a metal contact.	FTZ500 Flash Battery Cover Replaces the original battery cover for the FTZ500 Pentax flash
Replaces the original battery cover for the 115G	Replaces the original battery cover for the 115M	Original IQ 115 Battery Cover To fit the IQ Zoom 115 camera
ZX Camera Series Battery Covers Some mechanical skill required.	Replaces the original battery cover for the 140	Replaces the original battery cover for the 140M

Minolta Replacement Parts & Accessories
Minolta 3500xi Flash Foot
Replacement hot foot for the New style Maxxum xi series flashfoot. This replacement foot fits the 3500xi flash only, as far as we know. We only have two in stock. This is a new, not a salvaged part.

Miscellaneous Screws

Camera Screws by Hama
Male and female 1/4 inch screw threads on the top and bottom. 25mm wide at the widest point across. Made from aluminum.

Replacement Quick Release Screws

A 4-37097 To fit many Cullman and Vanguard quick releases.
Non-standard large 3/8 size screw, 13mm tall.
B 4-37098 To fit many Cullman and Vanguard quick releases.
Standard large 1/4 size screw, 13mm tall.
C1 3.79251 To fit Bogen for the quick release plates 3271, 3272, 3433PL, 357LONG, 116PT (old 3158). 1/4 screw, 15mm tall.
C2 3.79250 (not shown) To fit Bogen for the quick release plates 3271, 3272, 3433PL, 357LONG, 116PT (old 3158). 3/8 screw, 15mm tall.
D 4-37099 To fit many Velbon quick releases. 1/4 screw, 20mm tall.
These screws may fit other quick releases as well.

Spartan Photo Center, Inc.
Mail to: PO Box 160642
Boiling Springs, SC 29316