Slide_projectors

PanaVue Slide Viewers
PanaVue 1 Stands upright with viewing screen at an angle for easy viewing. Finger-touch switch, 2.75x2.75 inch viewing area. Operates on two "C" size batteries (not included).	PanaVue 2 Full coverage, big picture viewing of all 35mm and other 2x2 mounted slides. Operates on two AA size batteries (not included). Finger-touch switch. Viewing area is 1.75x1.75 inches square.

PanaVue Automatic Automatic refers to the slide changer mechanism, pull out the plunger on the right hand side, then push in to eject the previous slide. The ejected slides are stacked neatly in a hopper on the left. Shows up to 36 slides. 2.75x2.75 inch viewing area. Operates on two "D" size batteries (not included). Also operates on house-hold current with optional transformer.	PanaVue 3 Pocket Pocket sized, portable, easy to use, inexpensive. What more can you say. Comes in solid black color and will also view strips. No batteries needed (solar or other light source operated).

Transformer for PanaVue 1,2 and Automatic viewers. Just plug into AC socket and into the PanaVue. Has a 10 ft cord for easier use and "pass-ability."	Replacement Light Bulb Fits in the PanaVue 1, 2 and Automatic units, as well as, any other viewers using a #245 bulb.

Slide viewer box
For any sheet film, 35mm or medium format film, slides or transparencies, strips, tracings, etc. Uses cool burning fluorescent lamp. Thin enough to fit in a briefcase or carry on bag. Available in two sizes:

4x5 Light Box DC operation on 4 "C" batteries (not included). Pop out stand for angled viewing. Outside dimensions 6.25 X 5.25 X 1.5 inches.
AC Power Adapter Converts AC wall power into DC power for use with the 4x5 light box.
Not compatible with 8x10 light box.

8x10 Light Box DC operation on 6 "D" batteries (not included). Built-in handled becomes a stand for angled viewing. The sides are ruled in inches and millimeters for cropping alignment. Non-skid rubber feet. Key holed for wall mounting. Includes vinyl cover. Daylight balanced light. Outside dimensions 12.5 X 11 X 2.25 inches.

Loupes and Magnifiers

8X Agfa Style Loupe Basic 8 power loupe for slide, transparencies or negatives.

Kodak Carousel Projector Accessories

We no longer stock Kodak Carousel projectors since Kodak stopped making them in 2004.
We have a selection of accessories on hand, when sold-out we will not be able to get more unless they are used.

Used Kodak Carousel 140 Slide Trays. These are used and have writing on the boxes, but are in good shape otherwise. Sold as is, not tested because we no longer have projectors. They look OK.

25ft Extension cord- Adds 25ft to your remote cord. Not recommended that you use more than one with you remote.

Other Slide Trays and Accessories

Vivitar rotary slide tray fits Vivitar 5000 slide projector and some Sawyer and GAF projectors, in particular the Sawyers 747AQ slide projector because we tried it. Rotary trays stands upright like a carousel. Holds 100 mounted 35mm slides, slide slip without the use of a retaining ring. Works best with plastic mounts or new paper mounts. Not recommended for glass, 3mm or 4mm thick mounts or warped paper mounts.

The FCS bulb fits the Vivitar 5000 series projectors. It is simple to change, just plug into the socket. (Caution: Always handle this bulb with gloves or wrapped in a cloth to protect the bulb from finger oils. Your finger oils will react with the glass and heat and cause the bulb to burn out sooner.)

These are the round rotary trays that hold 100 slides. Buy an extra so you can have one ready to go when the Braun Multiscan 400 finishes the first tray, you can quickly swap them, speeding up your production.

Use the glassless 100S tray for thin mounts up to 2mm thick.
Use the glass 100 tray for thick mounts up to 3.5mm thick.

Are you slides damaged? Click here for slide remounting Supplies

Looking for Parts?
Click here to see our small selection of projection parts.

Spartan Photo Center, Inc.
Mail to: PO Box 160642
Boiling Springs, SC 29316