|
| |
Under reconstruction, please pardon our mess....
|
Bogen
Tripod Head Parts
Order using pull down menu at bottom
of table
Click Here for more Bogen Tripod Parts
Click Here for Tripod Quick Release
Plates
|
Replacement
bubble
Two Way level to fit the newer 3047 head (less
than 10 years old) and 3039.3047 heads that are older
than 10 years may not have all parts available now.
|
Replacement bubble
360 level for Bogen heads and tripods that have the single level. Shown
here in the slip-in holder. The level can be removed from this holder
and will pressure fit into many of the head or tripods that don't use the slip
in holder. |
|
|
|
Slik Parts
|
We
don't stock a lot of these replacement parts at this time. This is the
most common part for us to repair. This is the assembly that holds the
quick release plate onto the tripods. Click on picture to enlarge to about
life size. This is also called the flip plate, or vertical riser, it is
available in several styles for the U5500/6600; the U8000/9000; the U212DLX
and the Compact XL/Compact XL, 450G, 500G, 500GFL, 800G tripods.
|
| Coming Soon
Battery Covers And Other Camera Parts
We do not stock all models and cannot get
parts for all models made. Some parts are of limited supply, so large
orders may not be able to be filled completely. We will do our best to
fill as many orders as possible.
|
|
Foam and Damper Replacement
Kit
|
| Purchase this kit with all the necessary instructions
to clean out and replace the old sticky, gooey old damper and light seal foam.
Five different thicknesses of foam are included to replace the mirror damper
and film door seals on most older cameras that use foam light seal. Enough material
in each kit to replace the seals in at least 5 or 6 cameras, if not more.
All you need is simple tools like: tweezers, cotton swaps, tooth picks and denatured
alcohol. |
|
|
|
Canon
Rebel SLR Camera Parts
|
The basic appearance of the Rebel Battery Covers look similar check your camera
model for the correct one.
Some camera disassembly required.
Some mechanical ability required.
Parts are sold as is, with no instructions.
|
 |
Rebel S Battery Cover
Some camera disassembly required. Some
mechanical ability required (looks similar
to the one at right) |
|
Rebel XS Battery Cover
Some camera disassembly required. Some
mechanical ability required (looks similar
to the one above)
|
Rebel G II Battery Cover
Some camera disassembly required. Some
mechanical ability required (looks similar
to the one above) |
Rebel 2000 Battery Cover
Some camera disassembly required. Some
mechanical ability required (looks similar
to the one above) |
|
|
|
Canon Old Style Film SLR Camera
Parts
|
Canon T50 battery cover

The original replacement battery cover for the T50 35mm film Camera.
Limited availability. |
|
|
|
Canon Camera Parts
|

The original replacement battery cover for the Original ELPH APS film
Camera |
|
The original replacement battery
cover for the Original ELPH LT film Camera No
picture avalable
|
| |
Canon Sureshot
76 Battery Cover

Replacement for the original battery cover. |
Canon Sure shot Tele,
Sure shot Tele QD Battery Cover
Replacement for the original battery cover.
|
|
|
Canon Snappy
LX
Battery CoverBattery cover for the Snappy LX film
camera.
|
|
|
|
|
|
Canon Digital Camera Parts
|
Battery
Cover for the PowerShot S series digital cameras. This part includes the
rubber cover for the AC power supply hole. While they all look similar,
there are slight differences that make them incompatible with each other.
You must be model specific when ordering. |
| Battery cover
for PowerShot S100 camera |
Battery cover
for PowerShot S200 & S230 cameras |
|
| |
|
|
|
|
| |
Battery cover
for PowerShot 520 camera |
|
| |
|
|
|
|
| Canon
Digital SLR Camera Parts |
Original
replacement from Canon for the 10D & 20D D-SLR's, select in the pull down box
below. |
|
|
|
| Canon Point and Shoot Film Camera Parts |
Canon Sureshot Classic120
Battery Cover
CF1-3722 SS CLASSIC 120 BATTERY Fits the Sureshot Classic
120 and Caption Models
|
CG1-2062 FILM DOOR SS 85Z
|
CY1-1807 FILM DOOR Z135
|
| |
Canon Owl
Battery CoverCF1-2755 OWL BATTERY COVER Battery
cover for the Owl film camera with slide switch.
|
Canon Owl 2 Battery Cover
CF1-3433 OWL 2 BATTERY COVER Battery cover for the Owl film camera with the
dial on it.
|
Canon Owl 3 Battery Cover
CG1-6916 OWL 3 BATTERY COVER Battery cover for the Owl film camera with the
"V" shaped decor on the front.
|
|
Canon
Flash Parts
The shoes all look similar, there are differences in the
pin configuration and how they fit into the base of the flash.
Different shoes do not fit models other that those listed.
Select from pull down list below to choose. |
420EX
Flash Hot Shoe
The original replacement hot shoe for these flashes.
|
420EZ
Hot Shoe
The original replacement hot shoe for these flashes.
This hot shoe is discontinued and no longer
available from Canon. |
| |
| CY2-1121 420EX BATTERY COVER Battery Cover for the 420EX
flash.
|
| |
CB4-0746-000 HOT SHOE FOR
550EX Hot Shoe for 550EX,
MR-14EX, MR-24EX Flashes
The original replacement hot shoe for these flashes.
|
580EX Flash Hot
Shoe
CY2-1227 580/430 EX HOT SHOE The original replacement hot shoe for the new 580EX flash.
|
CY2-1391 580EX DIFFUSER
|
CB4-0745-000 550EX Flash Locking Wheel
|
| |
| |
| Canon Film Camera Parts |
Canon Elan II Film Door Latch
This
is the film door latch for the Elan II, IIe and the Elan 7 cameras. This
on the left back side of the camera and is under a panel. This part
releases the film door when you push on it.
Mechanical ability is required to replace this
part.
|
Rebel X/Xs Film Door Latch
This
is the film door latch for the Rebel X and Xs cameras. This on the left
back side of the camera and is under a panel. This part releases
the film door when you push on it. This is the picture for the Elan camera the
rebel looks very similar, but is reversed.
Mechanical ability is required to replace this
part. |
10D B attery Covers for the Canon
Digital SLR Cameras
These are the original replacement parts from Canon, not substitutes or
aftermarket made replacements. Available in black or silver as supply
dictates. Sorry we cannot offer a choice of colors, it is what
whatever is available at the time you order.
CG2-3786-000 10D BATTERY COVER
|
20D Battery Covers for the Canon
Digital SLR Cameras
These are the original replacement parts from Canon, not substitutes or
aftermarket made replacements.
CG2-1379 20D BATTERY COVER
|
| CM1-2538 G5 BATTERY COVER
|
CF1-5103 BATTERY COVER REBEL 
This is for the Original Digital Rebel camera, but not the
Rebel XT or XTi cameras
|
| CG2-1607-000 BATTERY COVER Digital REBEL
XT This is for the Digital Rebel XT cameras
only
|
| CG2-1880-000 BATTERY COVER Digital REBEL
XTi This is for the Digital Rebel XTi cameras only
|
| |
| CD1-3101/CD1-3102 BATTERY COVER
|
| Nikon Film Camera
Parts |
Nikon F100
Sponge Seal
for the film Door Window on the F100 camera. Can be
used on other film cameras like the N90, N90s and N8008..
|
| 1K682-670 WINDOW
|
| |
Battery Cover for the N4004,
N5005, F401 cameras. This is the battery door only.
The hinge pins and spring are no longer available
No longer available
|
1B999-382 BOTTOM COVER
for N6006
N6006 Base cover for N6006 only. Will not fit the N6000.
|
1C998-166 N65 BATTERY COVER
|
1K670-189-1 N 70 FILM DOOR Film Door for N70
Back only. No pressure plate or other parts attached. You will have to
remove the other parts from the old door and attache them to this door
before you can use it.
|
1C998-279 N75 BATTERY COVER
|
| |
| |
| 1C998-017 N80 BATTERY COVER
|
Film Doors for N80
There are three versions: Plain film door which is the back only; it includes
the control buttons, and film guides (shown at right). Pressure
plate is included, but the connecting ribbon wire and ribbon protective cover
are not and must be taken from old back.
There are two versions of the N80QD back; Version A the QD film door with one
dial; and Version B the QD film door with two dials. These backs are not
interchangeable and do not come with any of the
pressure plate, dials, screws or QD parts! These must be taken from the
old back.Plain N80 FILM DOOR
|
| |
Film Doors for N80
There are three versions: Plain film door which is the back only; it includes
the control buttons, and film guides (shown at right). Pressure
plate is included, but the connecting ribbon wire and ribbon protective cover
are not and must be taken from old back.
There are two versions of the N80QD back; Version A the QD film door with one
dial; and Version B the QD film door with two dials. These backs are not
interchangeable and do not come with any of the
pressure plate, dials, screws or QD parts! These must be taken from the
old back.1K660-152 N80 A FILM DOOR
|
Film Doors for N80
There are three versions: Plain film door which is the back only; it includes
the control buttons, and film guides (shown at right). Pressure
plate is included, but the connecting ribbon wire and ribbon protective cover
are not and must be taken from old back.
There are two versions of the N80QD back; Version A the QD film door with one
dial; and Version B the QD film door with two dials. These backs are not
interchangeable and do not come with any of the
pressure plate, dials, screws or QD parts! These must be taken from
the old back.1K660-153 N80 A FILM DOOR
|
| |
Film 1B999-938 F100 BACK
DOOR UNIT Door for F100
Back only, includes the control buttons, and film guides. Pressure
plate is not included.
|
| |
|
Nikon D-SLR Parts |
| Nikon 10 PIN REMOTE CAP PN# 1K467-156
|
Nikon SYNC CAP 1K467-157
|
Nikon D100 I/F Cover
This is the original replacement for the Nikon D100
|
1K467-247 Nikon D100 USB RUBBER COVER
|
| 25321 BM-5 LCD COVER
|
| D100 Battery Cover This
is the original replacement for the Nikon D100 battery door.
|
| Nikon Cool Pix Battery Covers |
Nikon Cool Pix 2100/3100 Battery Cover
Original
replacement part, no contacts are included. These must be salvaged from
the old part.
636-067-6893 CP 2100 AND 3100
|
Nikon Cool Pix 2200/3200/4100 Battery Cover
Original replacement part, no contacts are included. These
must be salvaged from the old part.
636-084-2236 CP2200,3200,4100
|
Nikon CoolPix 4200 Battery Cover
1K682-951 CP 4200 BATTERY Original
replacement part , no contacts are included. These must be salvaged from
the old part, or order the 5200 battery cover listed below.
|
Nikon CoolPix 4300 Battery Cover
Original replacement part, no contacts are included. These
must be salvaged from the old part.
636-066-6139 CP 4300 DOOR
|
636-082-3877 CP4600 BATT COVER
|
Nikon Cool Pix 5200 Battery Cover
Original
replacement part includes the battery contact.
1K682-951 AND 1K602-191 5200 Battery Cover
|
| |
1F998-002 COOLPIX L1 BAT COVER
|
1B990-544 BATTERY CHAMBER LID FOR
THE N6006/N6000 FILM CAMERAS
|
|
Coolpix
950 Battery Cover -
Fits only the CoolPix 950 digital camera. This is
the complete assembly.
|
|
Nikon Cool Pix Lens Caps |
25699
Cool Pix LC-CP16 S4 LENS CAP
Original replacement part, carefully snap onto the front of
your S4 (LC-CP16) and you are ready to go.
|
25741
Cool Pix LC-CP17 S10 LENS CAP
Original replacement part, carefully snap onto the front of your S10 (LC-CP17) and you are ready to go.
|
|
Nikon replacement foot for Speedlites |
Flash Foot Assembly for the SB-15 Flash |
FSA 02701-65-1 REPL SB28 FOOT O Nikon SB-28
flash foot

This part fits the older SB-28 that is not digital DX enabled
|
Nikon SB-28dx flash foot
(Click on picture to enlarge)
FSA03101-129-1 REPL SB 28DX FOOT Make sure your SB-28DX has the same ridge and hole pattern
as this, so you are sure to get the right part.
|
| Nikon SB-80dx flash foot assembly

SS 128-92 REPL SB 80 DX FOOT This is the whole assembly for the SB-80DX
flash with the metal foot.
|
| 636-054-4482 FOOT UNIT
|
1C999-286 FOOT UNIT
For the SB-80DXThis is the complete assembly with the metal shoe, easy
wiring clips and plastic base.
|
| |
Battery
Cover for the SB-800 Flash unit |
| |
| Film Door Latch Repair
Kit for N6006, N6000, N5005, N4004, N50, F401, F501, F601 and others.
The complete door is not available. 1K999-194-1 N6006 FILMDOOR LATCH
|
| here |
| Pentax Camera Parts |
Pentax Original IQ Battery
Cover
To fit the IQ Zoom EZY-R and 738G camera
|
|
IQ90WR
Battery Cover
PN# 27020.0A026 BATTERY COVER IQ 90W
Discontinued and no longer
available
|
|
IQ
105WR Battery Cover
Replaces the original battery cover for the older
IQ 105WR and IQ 95WR cameras
|
| |
| |
IQ115 BATTERY COVER
27300.A131
Original
IQ 115 Battery Cover
To fit the IQ Zoom 115 camera
|
| |
IQ115M BATTERY COVER
27300.A131Replaces
the original battery cover for the IQ Zoom 115M
| |